|
|
Build Your Online Product Catalogs?
| Product Name: |
ss304 perforated sheet
|
| Supply Ability: |
2000 pcs |
| Related proudcts |
perforated mesh, perforated sheet, |
| Specifications |
2000*2000*1.5*1*2mm |
| Price Term: |
fob |
| Port of loading: |
Tianjin |
| Minimum Order |
1PCS |
| Unit Price: |
110/PCS |
|
buying guid of perforated sheet:
Your are here: perforated / buying guide
We provide a brief guide to help you understand the nomenclature used for the specification of different types of perforated sheet.
Material
We can provide you the following material: stainless steel, carbon steel, zinc,Galvanized,Aluminum,Brass,Copper,Plywood,Fiberboard,Rubberboard,Woodboard,Pasteboard,Al-Mg.alloyplate,,Nickel-plate,Fiber.glass,PVC.plate ,Composites.
Specification
We can manufacture a wide rang of thick sheet verifying from 0.1mm to 25mm. Length is the overall measurement of the long side of the sheet. Width is the overall measurement of the -short side of the sheet. The standard sheet size is 1000mm*2000mm. and 1000mm*2500mm. The coil width 1000mm is also available. We also can process the special product for your requirement if you tell us the exact specification.
The hole shape
Round, square, long round, triangle, scale, diamond, oval, hexangular, slot etc.
Aperture
In general it is advisable to use a hole size larger than the material thickness. The closer the hole size and material thickness come to a 1 to 1 ratio, the more difficult and expensive the process is. Dependent on the material type, smaller hole size to material ratios can be achieved. The minimum diameter we can fabricate is 0.003" (0.08mm) . If you require a die that isn't already in our die bank, our experienced tool and die makers can quickly make exactly what you need at a reasonable cost.
Pattern
We have tooling available for many different hole patterns and shapes. It is more economical to choose one of the available patterns, although special hole sizes and patterns can be accommodated at additional cost.
Pitch
Hole center is the distance from the center of one hole to the center of the nearest hole in the next adjoining row.
Open area
Open area is the total area of the holes divided by the total area of the sheet and is expressed as a percent , Keep in mind that punching holes in a material add stresses that |
| Company: |
Guorun Hardware Mesh Products Co.,Ltd
|
| Contact: |
Mr. aLEX bEE |
| Address: |
Room 2617-2618, WanHao Building Block A, Zhong Hua Nan Street 176 |
| Postcode: |
050000 |
| Tel: |
8631185983867 |
| Fax: |
8631185983663 |
| E-mail: |
|
|
|
|
Home
